
The LinkedIn profile changes that help job seekers most are a headline that names the job you want plus your main skills, an About section that opens with what you do and the results you have had, a skills list that mirrors the wording in job postings, a current location, and the Open to Work setting turned on (privately for recruiters if you are employed). Recruiters find candidates by searching titles, skills and locations, so your profile needs the same words they type.
A profile does two jobs. First it has to show up in a recruiter’s search, which depends on keywords and filters. Then it has to convince the person who clicks, in the few seconds they spend on the top of the page. The tips below cover both: field limits, how to write each section, how Open to Work visibility works, and a one-hour checklist you can finish today.
How recruiters search LinkedIn
Recruiters using LinkedIn’s paid recruiting tools filter by job title, skills, location, years of experience, company, school and whether a candidate has signaled they are open to new jobs. They also run keyword searches across the whole profile. That means three things for you:
- Your current or target job title should appear in the headline and in your experience entries, written the way employers write it (“Accounts Payable Specialist,” not “AP Ninja”).
- Your location should be the metro area you want to work in. If you are relocating, many people set the new city once the move is certain.
- Skills listed in the Skills section count as a separate filter, so the exact terms from job postings belong there.
Profile sections, limits and what to put in each
| Section | Limit | What shows first | What to put there |
|---|---|---|---|
| Headline | 220 characters | About the first 60 to 70 characters in search results and comments | Target title, two or three core skills, one proof point |
| About | 2,600 characters | Roughly the first 300 characters before “See more” | What you do, for whom, with results; then skills and what you are looking for |
| Experience description | 2,000 characters per role | The first two or three lines | Three to five result-focused bullets per job |
| Skills | Up to 100 skills | Skills you pin or that match the viewer’s search | The exact terms from postings you are targeting |
| Open to Work | Recruiters only or all members | Green photo frame only if set to all members | Specific job titles, locations, work types and start date |
Write a headline that gets clicks
By default LinkedIn fills your headline with your current job title and employer. That wastes the most-searched line on your profile, especially if your title is internal jargon or you are between jobs. A useful formula is: target title, a separator, two or three skills, a separator, one specific result or credential.
- “Medical Billing Specialist | ICD-10, Epic, Denial Management | Cut claim denials 18% at a 12-provider clinic”
- “Warehouse Supervisor | Forklift-certified, Inventory Control, Team Scheduling | Led a 25-person night shift”
- “Entry-Level Data Analyst | Excel, SQL, Tableau | Google Data Analytics certificate”
Put the job title first because only the first 60 to 70 characters show in many places. Avoid “Seeking opportunities” or “Unemployed” as the whole headline; the Open to Work setting tells recruiters that already, and those words do not match any search.
Write an About section people finish reading
Only about the first 300 characters show before the “See more” link, so the opening two lines carry most of the weight. Start with what you do and a result, then give context.
- Open with one sentence that states your role and specialty, and one that gives your best result with a number.
- Add a short paragraph on the kinds of problems you solve or the work you do best, in first person and plain language.
- List four to eight core skills or tools in a single line, using the terms from job postings.
- Mention one or two credentials, licenses or projects that a recruiter would look for.
- Finish with what you are looking for (role, location or remote, industry) and how to reach you, such as an email address.
- Keep the whole section between about 1,200 and 2,000 characters so it is complete without being a wall of text.
Example: Tanya is a dental office manager moving into healthcare operations. Her About section opens: “I run front-office operations for busy dental practices. At my current two-location practice I cut unbilled claims from $41,000 to under $9,000 in eight months by rebuilding our insurance verification process.” Her second paragraph covers scheduling, staff training and vendor contracts. Her skills line lists Dentrix, insurance verification, accounts receivable, staff scheduling and HIPAA compliance. She closes with “Looking for practice manager or operations roles in the Phoenix area” and her email.
Choose skills that match real job postings
You can list up to 100 skills, but quality matters more than count. Pull the hard skills from five postings you would apply to today and add the ones you can honestly back up. Pin or order the most relevant ones so they appear first, and connect each skill to the job or certification where you used it, which LinkedIn lets you do when adding a skill.
Prefer specific tools and methods (“QuickBooks Online,” “OSHA 30,” “Salesforce reporting”) over broad soft skills (“communication,” “teamwork”), which nearly everyone lists and recruiters rarely search. Remove skills from careers you are leaving if they crowd out the ones for your target job.
Use Open to Work without tipping off your employer
Open to Work has two visibility options. “All LinkedIn members” adds the green #OpenToWork frame to your photo and can show your status to anyone. “Recruiters only” shares your job preferences with people using LinkedIn’s recruiter tools, with no frame on your photo. LinkedIn says it takes steps to hide the recruiters-only signal from recruiters at your current company but cannot guarantee they will not see it, so assume someone could.
Fill in the preferences carefully. Enter the actual job titles you want, every location you would accept (including remote), the work types (full time, contract, part time) and your start date. Recruiters filter on these fields, so a vague entry hides you from good matches.
Whether to use the public frame is a judgment call. It helps when you are unemployed, early in your career, or in a field where hiring managers browse directly. Some job seekers in senior roles prefer recruiters only to avoid looking like they will take any offer.
Fix the rest of the profile in one hour
- Photo: a clear, recent head-and-shoulders shot with plain background and good light. Profiles without photos look incomplete.
- Background banner: a simple image related to your field, or a plain color. It is minor; do not spend long on it.
- Custom URL: edit your public profile URL to your name (for example, linkedin.com/in/dana-lee) and use it on your resume.
- Experience: match titles and dates to your resume. Recruiters notice mismatches.
- Featured: pin one or two items that prove your skills, such as a portfolio piece, certificate or article.
- Recommendations: ask two former managers or clients for a short recommendation that mentions a specific result.
Example: Ray has a two-year gap after caring for a parent and is returning to IT support. He adds a “Career break” entry for those dates using LinkedIn’s career break option, changes his headline from “Looking for work” to “IT Support Technician | CompTIA A+, Windows 11, Microsoft 365 Admin | 5 years help desk experience,” and sets Open to Work to recruiters only with titles “IT Support Technician,” “Help Desk Analyst” and “Desktop Support Technician.” Over the next month he gets three recruiter messages for roles matching those titles, compared with none in the previous six months.
Common questions
Should I turn on the green Open to Work frame?
If you are unemployed or early in your career, the public frame usually helps because it signals availability to everyone who sees your profile. If you are employed, use the recruiters-only setting, knowing LinkedIn cannot fully guarantee recruiters at your company will not see it.
How long should a LinkedIn headline be?
You have 220 characters, but put the most important words in the first 60 to 70 characters, since that is roughly what shows in search results and comments. A target job title plus two or three skills fits in that space.
How many skills should I add to LinkedIn?
LinkedIn allows up to 100. Most job seekers do well with 25 to 50 relevant skills, ordered so the ten that match their target jobs most closely appear first.
Does my LinkedIn profile need to match my resume exactly?
Job titles, employers and dates should match. The descriptions can differ: your resume is tailored to each application, while your profile can be a bit broader and written in first person.
Do recruiters really use LinkedIn to find candidates?
Yes, LinkedIn’s recruiter tools are built around searching member profiles by title, skill, location and open-to-work status. A profile with the right keywords and preferences filled in shows up in more of those searches.
Before you start applying
- Rewrite your headline with your target title first.
- Make the first 300 characters of About state your role and one result.
- Add skills using the exact wording from five target postings.
- Set your location to the area where you want to work.
- Turn on Open to Work with specific titles, locations and work types.
- Check that titles and dates match your resume.
Editorial note: This article is general information checked as of November 2026. LinkedIn changes its features and limits from time to time, so confirm current settings in LinkedIn’s Help Center.